You may also like
Halite Kraken Waterproof Duffel Bag
Regular price $546.00
The Halite Kraken Waterproof Duffel bag is as tough as they come. The Kraken offers the highest levels of water and dust proof protection for your gear. Be that on operations, expeditions or world travel.
DELIVERY 6-8 DAYS For Shipping costs outside the UK, please email us at email@nordiclife.co.uk
Comes in 100l and 140L.
Designed for the toughest environments, the Kraken uses 840D High Tenacity Nylon throughout. The MultiCam® model comes in full 1000D Cordura® Nylon for maximum robustness. The unique end wing design gives easy access to the full compartment and the shape of the bag makes it stable when stacked on the floor of a boat or roof rack. PRO colours come with an additional Velcro ID panel and the air valve is uprated to a Halkey Roberts oral inflation system. This comes with a high flow, push-to-open valve.
Technical Specification.
PROPRIETARY FABRIC DEVELOPMENT
- 840D HT Nylon for industry leading toughness. High Tenacity (HT) Nylon yarn for exceptional durability, abrasion and chemical resistance. 1000D Cordura® Nylon on the MultiCam® model.
- Coated both sides with a thick layer of ether based TPU for prolonged contact with moisture and mildew resistance. These thick layers give the fabric a hydrostatic head of 100,000 mm, high abrasion resistance, high puncture resistance and an incredibly strong bond when RF welded.
- To help reduced detection by IR thermal imaging, we modify the texture of the outer coating.
RF WELDED CONSTRUCTION
- Seams are joined by means of RF welding (Radio Frequency). This creates a waterproof and extremely durable connection as strong as the fabric.
YKK AQUASEAL® #10
- Waterproof, airtight and pressure-resistant. Providing complete protection from the elements in or out of the water. Highly resistant to damage caused by dirt or sand.
WING DESIGN
- Unique end wing design, gives easy access to the main compartment with an extended length zipper.
STABLE LOADING
- The tapered sidewalls of the bag make it stable when stacked on the floor of a boat or roof rack on an expedition vehicle.
INNER ZIPPED POCKET
- Internal zipped pocket is big enough for documents or valuables: L36 x H25 cm.
TOUGH CARRY HANDLES
- Curved half-moon bartack design on all carry handles, which spreads the load no matter which way the handle is pulled. This is vital when carrying loads exceeding 40kg.
TIE DOWN POINTS
- Daisy chain lash points on both sides of the bag.
AIR RELEASE VALVE
- Top mounted air valve allows for inflation or deflation of the bag. PRO colours come with a Halkey Roberts oral inflation system. This comes with a high flow, push-to-open valve.
BACKPACK COMFORT
- The carrying straps are made of dual density EVA foam, a material designed for large expedition backpacks which gives you great weight balance, durability and comfort.
ONE-HANDED CHEST STRAP
- Chest strap designed to be used with one hand. It has a flat design which makes it extremely hard to break.
Dimensions: L92 x W44 x H37 cm
Weight: 2300g
Precise volume: 140L
Halite Fenris Recon Waterproof Rucksack
Regular price $365.00
The Halite Fenris Recon offers the highest levels of water and dust proof protection during Maritime Operations. Designed to easily pack your specialist or 2nd line gear. Available in 60L and 90L.
DELIVERY 6-8 DAYS - For Shipping costs outside the UK, please email us at email@nordiclife.co.uk
The combination of 840D High Tenacity Nylon and 420D High Tenacity Ripstop Nylon double-side TPU coated fabrics, creates the perfect balance of durability and low weight. The MultiCam® model comes in full 1000D Cordura® Nylon for maximum robustness. Designed with a slim profile to keep the load as close to the body as possible. PRO colours come with an additional Velcro ID panel and the air valve is uprated to a Halkey Roberts oral inflation system. This comes with a high flow, push-to-open valve.
Technical Specs
PROPRIETARY FABRIC DEVELOPMENT
- 840D HT Nylon and 420D HT Ripstop Nylon for industry leading toughness. High Tenacity (HT) Nylon yarn for exceptional durability, abrasion and chemical resistance. 1000D Cordura® Nylon on the MultiCam® model.
- Coated both sides with a thick layer of ether based TPU for prolonged contact with moisture and mildew resistance. These thick layers give the fabric a hydrostatic head of 100,000 mm, high abrasion resistance, high puncture resistance and an incredibly strong bond when RF welded.
- To help reduced detection by IR thermal imaging, we modify the texture of the outer coating.
RF WELDED CONSTRUCTION
- Seams are joined by means of RF welding (Radio Frequency). This creates a waterproof and extremely durable connection as strong as the fabric.
YKK AQUASEAL® #10
- Waterproof, airtight and pressure-resistant. Providing complete protection from the elements in or out of the water. Highly resistant to damage caused by dirt or sand.
INNER ZIPPED POCKET
- Internal zipped pocket is big enough for documents or valuables: L36 x H25 cm.
TOUGH CARRY HANDLES
- Curved half-moon bartack design on all carry handles, which spreads the load no matter which way the handle is pulled. This is vital when carrying loads exceeding 40kg.
TIE DOWN POINTS
- Daisy chain lash points on both sides of the bag.
AIR RELEASE VALVE
- Top mounted air valve allows for inflation or deflation of the bag. PRO colours come with a Halkey Roberts oral inflation system. This comes with a high flow, push-to-open valve.
BACKPACK COMFORT
- The carrying straps are made of dual density EVA foam, a material designed for large expedition backpacks which gives you great weight balance, durability and comfort.
ONE-HANDED CHEST STRAP
- Chest strap designed to be used with one hand. It has a flat design which makes it extremely hard to break.
Dimensions: L70 x W43 x H32 cm
Weight: 1650g
Precise volume: 92L
Halite Overbag Pro Sleeping Bag
Regular price $308.00
Designed to beef up insulation on your 3-Season or winter bag, turning it into a higher rated sleep system.
The Halite Overbag Pro adds approximately 14 degrees Celsius to any sleeping bag system.
The other major benefit is and overbag protects the innerbag from moisture and condensation.
Used on its own, the generous sizing makes it a great ventilated choice for a goodnight’s sleep in warmer climates or as an OP shelter on shorter missions.
Durable continuous fiber Climashield®APEX insulation, with hydrophobic Aquaban® DWR treatment, in combination with Pertex® Quantum shell and lining delivers great warmth at a low weight, with excellent stuffsac compression.
Features
- Shaped to fit over expedition down sleeping bags
- 2 long ¾ length zips on each side with 3 zip-pullers for adjustable ventilation and user versatility on post / OP
- Wide & angled foot box for extended comfort
- Side wrap construction with zippers on top to preventheat loss and cold spots through zipper on innerbag
- Drawcord adjustment to hood
- Sleeve inside hood for pillow insert to increase comfort
- Oversized stuffsack for smooth stuffing in the field.
Construction
- Shell: Pertex® Quantum, 47 g/m2, 30D Nylon
- Fill: Climashield® APEX with Aquaban® DWR technology
- Lining: Pertex® Quantum, 43 g/m2, 30D Nylon
- Zip: YKK® #8 Vislon 1-Way, 142cm on both sides
- Construction: Climashield® APEX double layer to top andhood, combined with single layered Climashield® APEXto base
- Foot piece: Angled foot box
- Hood: Anatomical shaped adjustable hood
Halite bags are independently tested and all temperatures stated correlate to EN23537.
Temperature EN 23537:
Comfort: 7°C / 45F
Comfort Limit: 3°C / 37F
Extreme: -11°C / 12F
Sleep rating: 0°C / 32F
Internal Size Dimensions EN 23537:
Inside length: 245cm
Inside With: 95cmInside Knee: 76cm
Inside Foot width: 52cm
Pack size:Base D19 x H26
Total weight:1064g
Alfa Polar A/P/S Expedition Ski Boot
Regular price $944.00
An extremely comfortable and warm BC-boot with an integrated gaiter that is reinforced with Kevlar on exposed areas. The boot has been developed specifically for expeditions and long journeys on skis in extremely cold conditions. Polar A/P/S also has a specially developed last that ensures you have room for liner or wool inner boots and if necessary vapour barrier socks. It also has extra insulation within the sole and liner. The boot has been used on a wide range of expeditions, both to the North and South Poles, however, it is also suitable for simpler expeditions in cold conditions. Liners or wool inner boots and vapour barrier socks are purchased separately. We recommend buying the boot 2 sizes larger than normal for use during extreme conditions.
NOTE: EMAIL FOR SHIPPING COST OUSIDE OF UK
BINDING COMPATIBILITY: Rottefella NNN BC
WEIGTH: 995 g pr shoe/boot (EU 42)
SHAFT HEIGHT: 19.5 cm (EU 42)
GAITER HEIGHT: 44.0 cm (EU 42)
Materials
EXP GAITER (BC)
Integrated gaiters made from durable Cordura. Provides extra insulation during extreme conditions and protects against snow. Extra reinforcement on the inside.
Sole Technologies
BC SOLE
Rottefella BC sole provides optimum stability, which contributes to good control in rough terrain and in variable snow conditions. The sole has good insulation properties.
STANDARD L-BOARD
A moisture absorbing insole with insulating properties to keep your feet dry and warm.
INSULATOR INSOLE
An anatomically designed insole made from insulating felt as well as breathable materials with good absorbency that keep your feet warm and dry. The sole has an antibacterial surface that helps prevent odours.
Fit & Support
EXPEDITION FIT
A specially developed fit that provides enough space for wool inner boots or two pairs of polar socks.
COMBO LACING SYSTEM
A lacing system that combines open and lockable hooks. Allows for individual adjustment of the ankle and forefoot.
Other Features
EASY ENTRY LOOPS
Easy entry loops make the boots easy to take on and off.
INTERNAL HEEL COUNTER
Heel reinforcements made of plastic that provide better support. An ergonomic and stable heel cap locks the foot in the boot, anchors it to the midsole and reduces the risk of blisters.
TOE PROTECTOR
A rubber-coated reinforcement that protects the boot from abrasion.
SNOW CRUST PROTECTOR
Extra layers of full grain leather that protect the lower part of the boot, which is particularly prone to wear, especially in snow with an ice crust.
